Roadside Safety Signs

How to assemble roadside safety signs

Locate the two (2) signs you'll be taking

Adopt-a-Roadway Step 1 locate advisory signs and place them in unobstructed area.

Unfold the legs of the base by pressing down on the tab and pulling the leg towards the ground.

Adopt-a-Roadway Step 2 unfold the legs of the base to form an X.

Unroll the sign, rotate the crossbar to meet loose corners, similar to stringing a bow, place one end of the crossbar on the ground and gently bend to fit into the tab.

Adopt-a-Roadway Step 3 unroll the sign, rotate the crossbar and string similar to a bow.

Repeat the process for the other side.

Adopt-a-Roadway Step 4 on the other side, rotate the crossbar and string similar to a bow.

Align support post into the square hole on the base, ensuring metal button is aligned with hole to prevent sign from flying away.

Adopt-a-Roadway Step 5 align the support post of the sign into the square hole on the base.

Raise little orange flags on the back of sign, and place in a safe location at either end of work area.

Adopt-a-Roadway Step 6 small flags located on back of sign.

A completely assembled and ready to use Adopt-A-Roadway sign.

Adopt-A-Roadway sign completely assembled and ready for use.